Description
Puissance :
100
kW max.Refroidissement :
Liquid
Isolation :
Not isolated
Plage de tension basse :
35 - 500
Plage de tension haute :
50 - 800
Caractéristiques
- Smart DC/DC converter, programmable as current or voltage source
- Optimized max power according to the power map
- Control according to voltage, current or power, input, or output
- Operations controlled through isolated CAN 2.0B
- Parallelization of DC/DC modules for higher power delivery
- Liquid cooling
Applications
- Fuel cell power
- Battery Systems
- Super capacitors
- Chargers
- Solar panel
Détails du produit
Communication and monitoring
| Typology | Max | Units | |
|---|---|---|---|
| CAN 2.0B bus speed | 500 | Kb/s | |
| CAN periodicity | 20 | ms | |
| Measured voltages accuracy | ±0.7 | ±2 | % of full scale |
| Measured Low Side current accuracy | ±1.9 | ±3 | % of full scale |
| Measured High Side current accuracy | ±1.7 | ±2.5 | % of full scale |
| Measured internal temperature accuracy | ±1 | ±3 | °C |
| Service Power Supply - Voltage | 32 | V | |
| Service Power Supply - Power consumption (single/double) | 7/15 | W |
Cooling parameters
| Min | Typ | Max | Units | |
|---|---|---|---|---|
| Flow rate | 3 | 5 | 6 | L/mn |
| Pressure | 5 | Bar | ||
| Inlet liquid temperature | -40 | +65 | °C |
Regulation Modes
| Current | Voltage | Power | |
|---|---|---|---|
| According to low side | ✔ | ✔ | ✔ |
| According to high side | ✔ | ✔ | ✔ |
Environment data
| Min | Typology | Max | Units | |
|---|---|---|---|---|
| Galvanic insulation between power circuit and chassis-control interface (1 min test) | 3.0 | kV | ||
| Insulation resistance | 100 | MΩ | ||
| Ambiant temperature (operating) | -40 | 85 | °C | |
| Ingress protection | IP65 | - |
Standards used for design
| Isolation | CEI 60664-1 |
|---|---|
| EMC | R10 |
| Control circuit supply voltage | ISO 16750-2 mode D |
| Mechanical loads | ISO 16750-3 |
| Climatic loads | ISO 16750-4 code G |
| Chemical loads | ISO 16750-5 mounting location A |
| Electric vehicle safety | R100 |
