Technical specifications of non-isolated liquid-cooled simple unit DC DC converters range

non-isolated liquid-cooled simple unit DC DC converters are able to:

• Operate on 35V to 950V voltage ranges 
• Generate an output power up to 120 kW
• Integrate to both stationary and embedded applications
• Transfer power in both boost and buck mode (bidirectional DC to DC converters)
• Integrate several control modes in input or in output: current, voltage and power
• Integrate a specific mode to battery charge
• Combine several DC DC converters to increase the total output power 

Power

Tame-power DC DC converters CONVY L S range allow to transfer up to 120 kW. The optimal distributed power level depends on system parameters and on voltage input and output ranges. Tame-Power proposes an individual support to ensure the perfect match between Tame-Power products, your specific needs and applications. 

Voltage

Tame-Power non-isolated liquid-cooled simple unit DC DC converters are predisposed to operate on voltage ranges from 35V to 950V in input or in output. 

Cooling

Tame-Power CONVY L S DC DC converters use liquid cooling:

• Liquid coolant: 50% glycoled water
• Flow rate: minimum: 3 L/min., typ. : 5 L/min., maximum : 7 L/min.
• Pressure: maximum: 5 bar
• Inlet liquid temperature: minimum : -20°C, maximum : +65°C.

Regulation modes

Tame-Power non-isolated liquid-cooled simple unit DC DC converters are easy to execute and are managed by CAN messaging. Tame-Power products integrate several control modes, in input or output: current, voltage, power.

Tame-Power non-isolated liquid-cooled simple unit DC DC converters beneficiate from an embedded intelligence allowing to optimize the output power on each operating point.

Mecanics

Non-isolated liquid-cooled simple unit DC DC converters weigh 11kg per unit:

Starter Kit 

Tame-Power developed the Starter Kit which aims to facilitate non-isolated liquid-cooled simple unit DC DC converters start up and power up. The Starter Kit aims to expedite Tame-Power DC DC converters power up thanks to its dedicated content: Tame-Power HMI, CAN communication probe, PEAK CAN driver software, communication and power cables. 

Customization

For your specific needs, Tame-Power proposed to adjust its catalogue references to make available products:

• Meeting your specific needs on the basis of Tame-Power catalogue products
• Allowing to optimize your time requirements at controlled costs
• Permitting to propose a product which is specifically adjusted to your application environment

DC DC converters racks

Tame-Power DC DC converters are assemblable to increase the total output power. Hence, Tame-Power proposes to associate up to 10 power conversion modules per system, allowing to reach output power in order of megawatts.