High voltage DC DC converters
Customizable and assemblable 1kW to 120kW DC DC power conversion solutions
E-Mobility generic products
Tame-Power DC DC converters allow to transfer power from one DC (Direct Current) voltage range to another with an optimal power efficiency. Tame-Power products differ from other DC DC converters thanks to technical choices allowing to optimize output power and efficiency for high voltage to high voltage (HV HV) applications and have a large spectrum of application.
Tame-Power DC DC converters are available in their original setup and can be parametrized to adapt to your environment and constraints. Tame-Power DC to DC converters are:
- Simple use: thanks to a simple CAN messaging and several modes of control (current, voltage, power, in input or in output)
- Assemblable: Tame-Power DC DC converters can be combined to increase the total distributed output power
- Customizable: Tame-Power proposes to adjust its references to make available products which will meet your specific needs.
High voltage DC DC converters technical specifications
Tame-Power DC DC converters allow to transfer from 1kW to several megawatts on 6V to 950V input and output voltage ranges.
DC to DC converters are able to couple different power sources in hybrid architectures integrating: fuel cells, batteries, supercaps, rectifiers, traction chains, resistors, etc. Tame-Power products integrate all control modes for optimal operation. Tame-Power DC DC converters are able to:
- Operate on 6V to 950V voltage ranges
- Generate 1kW to 120kW output power per power conversion module
- Integrate to both stationary and embedded applications
- Transfer power in both boost and buck mode (bidirectional DC to DC converters)
- Integrate several control modes in input or in output: current, voltage and power
- Integrate a specific mode to battery charge
- Combine several DC DC converters to increase the total output power
Tame-Power high voltage DC DC converters perfectly adapt to applications of the e-mobility, aeronautics and marine markets and easily embed architectures integrating: fuel cells, batteries, supercaps and auxiliary power supplies.
High voltage DC DC converters technical features
Tame-power DC DC converters range allow to transfer from 1kW to 120kW per power conversion module. The optimal distributed power level depends on system parameters and on voltage input and output ranges. Tame-Power proposes an individual support to ensure the perfect match between Tame-Power products, your specific needs and applications.
Tame-Power DC to DC converters are predisposed to operate:
- Under high voltages (HV) : from 200V to 950V.
Currently, voltage ranges oscillate between 400V and 600V with higher voltage ranges perspectives over the coming years.
- Under low voltages (LV) : from 0V to 200V.
Tame-Power products easily integrate embedded applications while transfering several kW to specific low voltage ranges: 12V, 24V and 48V (automotive market) or 28V (aeronautics).
Tame-Power DC DC converters can be liquid or air cooled.
Liquid cooling system
- Flow rate: minimum: 3 L/min., typ. : 5 L/min., maximum : 6 L/min.
- Pressure: maximum: 5 bar
- Inlet liquid temperature: minimum : 0°C, maximum : +65°C.
Air cooling system
- Air flow rate: maximum : 268 m³/h
- Inlet air temperature: maximum : 55°C
Tame-Power range of isolated DC to DC converters (CISO L) ensure the segregation of low voltage (LV) and high voltage (HV) sides thanks to a galvanic isolation allowing to separate volatge ranges.
Key features of CISO L isolated DC DC converters
- Programmable DC DC converters, in input or output (current, voltage, power)
- Buck mode
- Liquid cooling
- 3kV galvanic isolation between high voltage (HV) and low voltage (LV) ranges
- HVIL on input voltage range
- Isolated CAN 2.0B connectors
Applications of CISO L isolated DC DC converters
- Battery systems
- Electric vehicles
Tame-Power DC DC converters are easy to execute and are managed by CAN messaging. Tame-Power products integrate several control modes, in input or output:
Tame-Power DC DC converters beneficiate from an embedded intelligence allowing to optimize the output power on each operating point.
Power sources and consumers
Tame-Power DC to DC converters adapt to several power sources:
- Fuel cells,
They also associate with various power consumers as: traction chains, embedded accessories or other electric architetcures consumers.
For your specific needs, Tame-Power proposed to adjust its catalogue references to make available products:
- Meeting your specific needs on the basis of Tame-Power catalogue products
- Allowing to optimize your time requirements at controlled costs
- Permitting to propose a product which is specifically adjusted to your application environment
DC DC converters racks
Tame-Power DC DC converters are assemblable to increase the total output power. Hence, Tame-Power proposes to associate up to 10 power conversion modules per system, allowing to reach output power in order of megawatts.
High voltage DC DC converters applications
Tame-Power products are intended to stationary and embedded applications of e-mobility, aeronautics and marine markets. Tame-Power DC to DC converters blend in:
- Stationary applications: chargers, charging stations,
- Embedded applications: electric cars, hybrid vehicles, buses, trucks, aircrafts, service boats, pleasure boats, special vehicles and electric vehicles.
Associated service: custom-made DC DC converters design and manufacturing
Expert in power electronics, Tame-Power designs and produces the set of its products. By means of its experience and generic products available, Tame-Power offers its expertise in power electronics throughout the entire product life cycle:
- Innovation and definition of electrical architectures: advice on the development of electrical architectures, optimisation and validation of technical solutions in correlation with the target application market,
- Detailed design: definition of specific parameters, electronic, software, mechanical and aesthetic adaptation,
- Industrialization, validation and launch phase: industrialization and testing,
- Serial production: assembly and integration,
- After-sales service: start-up assistance, integration, on-site or remote diagnostics.